Permobil Permolock C Owner's Manual page 13

Owner´s Manual Permolock C
Locking the wheelchair
2. Move the wheelchair straight in
over the locking plate so the lock-
ing device on the chair engages
with the locking plate mechanism
and comes to a mechanical stop.
The locking plate control button,
which is mounted in the vehicle,
will shine green. This indicates that
the wheelchair has been correctly
locked.
m
WARNING
Make sure the lamp on the control button at the front edge of the armrest lights up orange as you
drive in over the locking plate.
Check that the lamp on the control button in the vehicle is shining green after locking has been
activated. If the lamp is not green, your wheelchair is not secured in the locking plate and could come
loose in the event of a collision.
3. After you are correctly locked in the Permolock, fasten your vehicle mounted
seat belt.
Move the wheelchair in over Permolock C.
Example of position of control button
in the vehicle.
13
Operation