Locking The Wheelchair - Permobil Permolock C Owner's Manual

Owner´s Manual Permolock C
Operation

Locking the wheelchair

Permolock C consists of two elements.
One is a locking device mounted on the
wheelchair chassis and operated by a
control button on the front edge of the
armrest, see photo.
The second element, a locking plate,
is mounted in the vehicle. This is oper-
ated by a similar control button mount-
ed in the vehicle. The position of the
control button may vary depending on
the vehicle and the user's needs. The
photo on page 13 shows an example
of a commonly used position.
1. To prepare the wheelchair for lock-
ing, keep the button on the front
edge of the armrest pressed in for
three seconds - the locking device
underneath the wheelchair will
extend.
The locking device will remain in
extended position for 40 seconds.
During this period the control but-
ton lamp will show an orange color,
indicating that the wheelchair is
ready for locking in the locking
plate. If you do not manage to lock
the wheelchair during this time,
repeat the above procedure.
The locking device's control button is
mounted on the wheelchair armrest.
Control button lamp.
12
Operation