Manual Release Of Wheelchair - Permobil Permolock C Owner's Manual

Owner´s Manual Permolock C

Manual release of wheelchair

If the vehicle battery is discharged,
it will still be possible to release the
wheelchair manually. This is done with
a manual release lever, the position of
which in the vehicle may vary depend-
ing on type of vehicle and the user's
needs.
1. To open the locking plate
anism manually, move the lever to
its open position, see photo. The
locking plate mechanism will open
and the wheelchair can now be
backed out of the lock.
m
NOTE
In the event of manual release on a steep
upwards gradient, the wheelchair may simul-
taneously be "driven" forward to ease release.
2. As the wheelchair is being backed
out of the locking plate, reset the
locking mechanism to locked posi-
tion by moving the lever back to
its original position.The lock is then
ready for relocking again.
m
CAUTION
Always reset the locking mechanism to the
locked position after backing the wheelchair off
the locking plate. If you do not reset the lock, it
will not be ready for relocking.
mech-
Backing the wheelchair out of Permolock C.
Open position
Manual release of wheelchair
15
Operation
Locked position