4.1.6
PROFINET Module Configuration
4.1.6.1 System and Field Power cable wiring
Figure 40: System power & Field power connections
1. For safety, supply system power and field power should be separated.
2. Make sure power supplies for system power and field power are supplied separately.
3. Do not insert any other devices or components (such as transistor) into PROFINET
GFK-2746B
PACSystems* RSTi PROFIBUS and PROFINET Network Adapter–August 2013
a. System Power: for System & PROFINET communications
b. Field Power: for I/O field device connections
field bus or besides PROFINET qualified products.
Chapter 4. PROFINET Network Adapter
73