GE Socket Adapter User Manual

Enclosed you will find
(1) Socket Adapter
The GE SmartRemote
Socket Adapter
Plus ™ advantage
Smart Remote Plus Receiver
Any transmitter in the GE Smart Remote Plus
product line is capable of controlling every
receiver—the ultimate in home convenience.
User's Manual
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.
WARNING
Risk of electric shock
• Turn power off before inspection,
installation or removal
• Keep children away
• Use indoors only
Questions? • Do not use in wet locations
• Screw in securely
Call 1-800-443-4924
or visit us at Risk of fire
C US
• Do not exceed electrical ratings
www.GESmartHome.com
LISTED
The following GE Smart Remote Plus transmitters (sold separately) can control THIS receiver:
Key Chain Remote Wall Mount Control Whole-Home Control Motion-Sensing Control Garage Control
RF 100 TXPS RF 102 TXPS RF 2000 KINPS RF6 13 TX COMING SOON!
The transmitters above can also control the following GE Smart Remote Plus receivers (sold separately):
Indoor Outlet Outdoor Outlet Socket Adapter Wall Switch Garage Adapter Dimmer Switch
RF 100 RXPS RF 106 RXPS RF 104 RXPS RF 102 RXPS COMING SOON! COMING SOON!
IMPORTANT! These devices are NOT compatible with devices from other systems.
You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.
To extend the range of the
transmitters and receivers
in your system, use the
GE Smart Remote Plus
GE Smart Remote Plus
Range Extender
Transmitter
(sold separately).
GE SmartSecurity ™ System
Range Extender
RF 100 RXTX
Expanding your system
The GE Smart Remote Plus devices operate on any of 8 user-settable channels. The channels are
easy to set / adjust – with the simple turn of a knob. Set up your GE SmartHome ™ by purchasing as
many transmitters and receivers as you need. The following table is just one example of how you
can configure your Smart Remote Plus system:
Area CH Transmitters Receivers
Bedroom 1 Bedside - Wall Mount Control (2) Bedside Lamps - (2) Socket Adapters
Entrance - Wall Mount Control Corner Torchiere - Indoor Outlet Adapter
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Living Room 2 Coffee Table - Timer/Controller (2) End Table Lamps - (2) Socket Adapters
Entrance - Wall Mount Control Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Christmas Tree - Indoor Outlet Adapter
3 Window Santa - Indoor Outlet Adapter
Lighted Poinsettia - Indoor Outlet Adapter
Basement 4 Entrance - Wall Mount Control (4) Overhead Can Fixtures - (4) Socket Adapters
(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters
Garage 5 Entrance - Wall Mount Control (2) Fluorescent Fixtures - (2) Outdoor Outlet Adapters
Overhead Light Fixture - Wall Switch
Outdoor 6 Foyer- Wall Mount Control Entry Light - Wall Switch
Car Keys - Key Chain Remote Coach Lantern - Wall Switch
7 Christmas Lights - Outdoor Outlet Adapter
Yard Santa - Outdoor Outlet Adapter
Kitchen 8 Entrance - Wall Mount Control Coffee Maker - Indoor Outlet Adapter
Operating Instructions
FOR INDOOR USE ONLY
1. Turn the unit upside down and find the slot labeled HOUSE CODE.
2. Set the HOUSE CODE to any one of the following settings:
NOTE: Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting. The
transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / off).
If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus
transmitters and receivers to a different setting.
3. Keeping the unit upside down, set the CHANNEL by using the knob as shown.
NOTE: If you set your Socket Adapter to CHANNEL 1, the unit can be controlled
using any transmitter set to CHANNEL 1. If you set your Socket Adapter to
CHANNEL 2, the unit can be controlled using any transmitter set to CHANNEL 2 ... and so on.
IMPORTANT! A transmitter will control a receiver ONLY if they have the same
HOUSE CODE and CHANNEL settings.
4. Screw the Socket Adapter into a powered 125 VAC socket.
5. Screw the light bulb you wish to control into the Socket Adapter as shown.
The following are examples of devices you can control with your Socket Adapter:
LAMP ENERGY-SAVING BULB CEILING LIGHT
6. Using any of the transmitters set to the same CHANNEL and HOUSE CODE, test the installation
by using the ON and OFF buttons. An indicator light on the Socket Adapter lights RED when it
receives an ON signal.
CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT SOCKET IS POWERED.
DO NOT SCREW / UNSCREW BULBS INTO / FROM THE SOCKET ONCE IT IS POWERED.
If your unit does not work properly or if you want additional assistance, please call 1-800-443-4924.
We would be happy to answer ALL of your questions. Visit us on the web at www.GESmartHome.com
to download application notes, manuals and to find out more about the GE SmartHome
Specifications
FOR INDOOR USE ONLY
DO NOT EXCEED ELECTRICAL RATINGS
Electrical Rating .................................................................................................................................. 120 V, 60 Hz
Maximum Tungsten Load .............................................................................................................................. 200 W
Maximum Motor Load .................................................................................................................................... 1/3 HP
*Functional range may be adversely affected by one or more of the following factors: weather, radio
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Made in China for GE Home Electric Products, Inc.
Nela Park, Cleveland, OH 44112
Desc.: RF 104 RXPS
™ product line!