Io Module Status Led (I/O); Field Power Status Led; Port1, Port2: Link And Activity - GE PACSystems RSTi User Manual

Chapter 4. PROFINET Network Adapter

4.1.3.3 IO Module Status LED (I/O)

Table 36: STXPNS001: IO Status LED
Color
Off
Flashing Green
Solid Green
Solid Red
Flashing Red

4.1.3.4 Field Power Status LED

Table 37: STXPNS001: Field Power Status LED
Color
Off
Solid Green

4.1.3.5 Port1, Port2: Link and Activity

Table 38: STXPNS001: Port1, Port2: Link and Activity
Color
Solid Green
Flashing Green
Off
70
Status
Not Powered
No IO Module
RSTi Bus On-line
RSTi Bus Connection
RSTi Bus connection fault
IO Configuration Failed
Status
Not Supplied Field Power
Supplied Field Power
PACSystems* RSTi PROFIBUS and PROFINET Network Adapter–August 2013
Function
Device has no IO module or may not
be powered
RSTi Bus is on-line but does not
exchanging I/O data

IO module is connected and run
exchanging I/O data
One or more IO module occurred in
fault state.




Failed to initialize IO module





Function
Not supplied 24Vdc field power
Supplied 24Vdc field power
Function
Link is up (Physical connection is established)
Active is present
Link is down
Changed IO module
configuration.
RSTi Bus communication
failure.
Word data type error
Parameter setting error
Detected invalid IO module
ID.
Overflowed Input / Output
Size
Too many IO module
Initial protocol failure
Mismatch vendor code
between adapter and IO
module.
GFK-2746B