Table of Contents
Advertisement
Overview
Module Features
1
About POINT I/O Modules
Read this chapter to familiarize yourself with configurable features on the
1734-IT2I, 1734-IR2, and 1734-IR2E modules. The following table lists where
to find specific information in this chapter.
Topic
The module features include:
Input type
• Sensor type
• Data formats
• Preset temperature selection
• Fault mode
• Overrange alarms
• Underrange alarms
• Fault alarms
You must use your programming software, like Rockwell Automation
RSNetWorx, to configure these features. See this chapter for a brief
description of each module feature. Use the online help included with your
programming software to perform specific configuration. You can find the
EDS files for this module at www.ab.com/networks/eds/.
Chapter
Page
1
2
2
5
6
6
Publication 1734-UM004F-EN-E - December 2012
1
Advertisement
Table of Contents
