Basic Setup Of The Transmitter - Emerson Rosemount 3051P Reference Manual

Reference Manual
00809-0700-4001
2.7.4 Verifying process variables configuration
This section describes how to verify that the correct process variables are selected.
Verifying process variables with a Field Communicator
Procedure
From the HOME screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
Verifying process variables with AMS Device Manager
Procedure
1. Right click the device and select Overview from the menu.
2. Select the All Variables button to display the primary, secondary, tertiary, and
2.8

Basic setup of the transmitter

This section provides the necessary steps for basic setup of a pressure transmitter.
When installing in DP level or DP flow applications, refer to
setup instructions.
2.8.1 Setting pressure units
The pressure unit command sets the unit of measure for the reported pressure.
Setting pressure units with a Field Communicator
Procedure
From the HOME screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
Setting pressure units with AMS Device Manager
Procedure
1. Right click the device and select Configure.
2. Select Manual Setup and select desired units from Pressure Units dropdown menu.
3. Select Send when complete.
Rosemount 3051P
quaternary variables.
Configuration
April 2020
3, 2, 1
Configuring scaled variable
2, 2, 1, 1, 4
for
19