Overview
Configuration Overview
Commissioning a Node
17
Configure Your Module
This chapter describes how to configure your thermocouple input module
with RSNetWorx.
Topic
Configuring POINT I/O modules is as easy as point and click. RSNetWorx
lets you identify the network and configure the I/O modules
with Electronic Data Sheet (EDS) files - just point to the field and click your
selection.
To obtain EDS files for use in configuration, go to
http://www.ab.com/networks/eds.
In this chapter, you learn how to do the following.
• Add the adapter to the system.
• Commission individual modules in the system.
• Set the individual modules parameters.
Here are the methods for commissioning nodes.
• Use the RSNetWorx commissioning pull-down dialog.
• Use the Sequential Auto Addressing feature.
• Use third-party configuration software.
Chapter
Page
17
17
19
22
24
29
31
36
37
Publication 1734-UM004F-EN-E - December 2012
3