Table of Contents
Advertisement
4-4
Configuring the DeviceNet Network
Using RSNetWorx to
Configure the 1756-DNB
Module Scanlist
Publication 1756-6.5.19 - May 2000
Setting Up an Online Connection
Follow the procedure below to set up the DeviceNet network using
the 1770-KFD driver.
1. Start RSNetWorx.
2. From the File menu, select New.
If you have RSNetWorx for ControlNet installed on your computer
you may see the following window. Otherwise, proceed to step 4.
3. Highlight DeviceNet Configuration and click on OK.
4. Click on the Online button
on the toolbar.
Advertisement
Table of Contents
