Table of Contents
Advertisement
Chapter 3
Configure the Module for Your EtherNet/IP Network
28
1. Run the BootP/DHCP software.
The BOOTP/DHCP Request History dialog appears showing the
hardware addresses of devices issuing BootP/DHCP requests.
2. Double-click the hardware address of the device you want to configure.
The New Entry dialog appears showing the device's Ethernet
Address (MAC).
3. Enter the IP Address you want to assign to the device and click OK.
Rockwell Automation Publication 1732E-UM007A-EN-E - August 2016
Advertisement
Table of Contents
