Table of Contents
Advertisement
Use the Programming
Software, Version 18 or
Later, to Configure a Module
After reviewing
Chapter 2
capabilities of your module, you are ready to configure the module by using the
programming software, version 18 and later. This section provides
instructions and screen facsimiles for creating a module.
Programming software, version 15 and later, lets you add I/O
IMPORTANT
modules online. When using any previous version, you must be
offline when you create a new module.
These steps assume that you have started the programming software and have
created a controller.
1. On the Controller Organizer, right-click I/O Configuration and choose
New Module.
The Select Module dialog box appears.
2. Click the '+' next to Specialty for a list for this module group.
3. Select 1756-HSC and click OK.
Rockwell Automation Publication 1756-UM007E-EN-P - August 2021
and
Chapter 3
for a better understanding of the
Chapter 5
Configure the Module
55
Advertisement
Table of Contents
