Exhalation Flow Sensor - Respironics ESPRIT Service Manual

Chapter 9
Component Removal/Installation
9-52
8. Wiggle the outlet block to remove from the exhalation manifold, then
remove the exhalation flow sensor.
Enclosure
brace
Exhalation
valve outlet
port
Tie wraps
Figure 9-63: Exhalation Flow Sensor
Follow these steps to install the exhalation flow sensor:
NOTE: The filter heater assembly and exhalation valve assembly must be
installed before reinstalling the exhalation flow sensor.
Esprit® Ventilator Service Manual © Respironics, Inc.
Figure 9-62: Enclosure Brace
Screws
To vent port
Exhalation
valve
Filter heater
Exhalation
flow sensor
REF 580-1000-02 G