Connecting A Mask With Built-In Exhalation Port; Connecting A Mask With A Separate Exhalation Device - Respironics REMstar Pro M Series User Manual

2. Connect the tubing to the mask:
a. If you are using a mask with a built-in exhalation port, connect the mask's connector to
the flexible tubing, as shown in Figure 3–3.
b. If you are using a mask with a separate exhalation device, connect the open end of the
flexible tubing to the exhalation device as shown in Figure 3–4. Position the exhalation
device so that the vented air is blowing away from your face. Connect the mask's connec-
tor to the exhalation device.
Warning:
Warning:
3. Attach the headgear to the mask. See the instructions that came with your headgear.
rEm p m s
star ro ErIEs
Exhalation Port
f 3–3 C
IgUrE onnECtIng a
f 3–4 C
IgUrE onnECtIng a
The exhalation device (e.g., Whisper Swivel II) or exhalation port (on
masks with an integrated exhalation port) is designed to exhaust CO
from the patient circuit. Do not block or seal the ports on the exhala-
tion device.
If you are using a full face mask (i.e., a mask covering both your mouth
and your nose), the mask must be equipped with a safety (entrain-
ment) valve.
U m
sEr anUal
Mask's
Connector
Flexible
Tubing
Connector
m b - E
asK WIth UIlt In
Exhalation
Device
Flexible
Tubing
Connector
m s E
asK WIth a EparatE
p
xhalatIon ort
d
xhalatIon EvICE
2
3-3