Pylontech PowerCube-X1 Operation Manual page 26

Lithium-ion phosphate energy storage system

Hide thumbs Also See for PowerCube-X1:

Table of Contents

X1/X2s uses CAN cascade communication mode. The communication between the MBMS and

the BMS of 1

PowerCube-X1/X2 uses CAN communication mode.

CAN Communication Mode between MBMS and BMS Cable Diagram:

Note: The 1

PowerCube-X1/X2 should be installed nearest to the

MBMS.3.6.3 ADD Switch Setting (Address Assignment)

ADD Switch BMS is a 6 bit dial switches to manually distribute the

communication address of the battery system. Nether position is OFF,

means "0". Upper position is ON, means "1". 1

bit to 5

bit is for address,

EU20PIXV0501

22 / 38

Table of Contents

Powercube-x2