Ablerex KRONOS Installation And Operation Manual page 58

 All menu functions are in the table below.
Menu Sub-Menu
Mimic Display
Operation
(1)
Command
Buzzer & Alarm
Battery Test
Identification
Real Time
Information
Monitor
Maintenance Code
Configuration
Displays the UPS status、alarm、operating mode and
measurements. Please refer to section 4-3 for more detail.
 Normal Mode
 ECO Mode
 Converter Mode
 Shutdown
 Load on Bypass
 Cold Start Precharge Ready
 Enable/Disable buzzer
 Clear Latch Alarm and Buzzer
 Force Charger on
Other
 Recovery Backfeed Protection Signal
 Clear UPS Maintenance Alarm
 Battery Test.
 Turn off The Battery Test.
Displays UPS information
Displays real time measurements of input, output, bypass and
battery.
Displays the maintenance code for technician to check the status of
the UPS.
Version Displays the control MCU software and firmware version.
Set alarm latch function.
 General Alarm
 Mains Alarm
 Bypass Alarm
Alarm  Over Temperature
 Vbatt. Low
 Inverter Overload
 Bypass Overload
 EPO Activated
Main
Bypass Select the measurements on the Mimic Display.
Output
Functions
56