Table of Contents
Advertisement
2.6
Communication Cables Connections
Dry Contacts
The UPS provides 3 output dry contacts and1 input contact.
Specification of Output dry contact：250 VAC/ 2 A; 30 VDC/2 A
There are 3 jumpers (J1~J3) to set NC/NO for each output contact.
To short the input contact to send a command to the UPS.
The user can change the definition for each contact, please contact the local authorized
service agent to change the setting.
Jumper (J1~J3) are displayed in Internal Top View (Please check section 1-2.UPS Outlook
View).
10kVA
30-40kVA
15-20kVA
40
Advertisement
Table of Contents
