Luna BTS 315 User Manual page 47

• Never insert materials which are different from those
which are prescribed for the machine utilization. The
material to be machined must not contain any metal
parts.
• Never machine pieces which may be too small or too
wide ithrespect to the machine capacity.
• Do not work wood which has evident defects (cracks,
knots, metal parts, etc.)
• Never place hands among the moving parts and/or
materials.
• Keep hands clear from the tool; feed the piece with
the aid of a pusher.
• Keep the tools tidy and far away from those not aut-
horized persons.
• Never employ cracked nor uckled, neither not cor-
rectlyreground tools.
• Never use the tools beyond the speed limit recom-
mended bythe producers.
• Carefully clean the rest surfaces of tools and make
surethat they find perfectly horizontally positioned,
and with no dents at all.
• Always wear gauntlets when handling the tools.
• Mount the tools in the right machining direction.
• Never start the machine before having correctly in-
stalled all the protections.
• Connect the dust suction hoods to an adequate suc-
tion system; suction must always be activated when
the machine is switched on.
• Never open doors or protections when the machine
or the system is operating.
• Many unpleasant experiences have shown that any-
body may wear objects which could cause serious
accidents.Therefore, before starting working, take
any bracelet, watch or ring off.
• Button the working garment sleeve well around the
wrists.
• Take any garment off which, by hanging out, may
get tangled in the moving units.
• Always wear strong working footwear, as prescribed
by the accident-prevention regulations of all countries.
• Use protection glasses. Use appropriate hearing pro-
tection systems (headsets, earplugs, etc.) and dust
protection masks.
• Never let unauthorized people repair, service or ope-
rate the machine.
• The manufacturer is not responsible for any damage
deriving from arbitrary modifications made to the
machine.
• Any transport, assembly and dismantling is to be
made only by trained staff, who shall have specific
skill for the specified operation.
• The operator must never leave the machine unatten-
ded during operation.
• During any working cycle break, switch the machine
off.
• In case of long working cycle breaks, disconnect the
general power supply.
2.2 Residual risks
• Contact with tool
• Contact with moving parts (belts, pulleys, etc..)
• Workpiece might be kicked back. Please stand out-
side the side of blade and out of the kick-back area.
• Accidents due to wood splinters or fragments
• Tool insert ejection
• Electrocution from contact with live parts
• Danger due to incorrect tool installation
• Inverse tool rotation due to incorrect electrical con-
nection
• Danger due to dust inhalation in case of working
without vacuum cleaner.
Bear in mind that the use of any machine tool carries
risks.
Use the appropriate care and concentration for any
type of machining (also the most simple).
2.3 Safety and information signals
This signals may be applied on the machine; in some
cases they indicate possible danger conditions, in
others they serve as indication.
Always take the utmost care.
Safety signals:
Risk of eye injury.
46
If any accident happened because
of unqualified connected electric
c o m p o n e n t s o r d i s o r d e r e d
assembly, the manufacturer will
not be responsible for the results.
If any accident happened because
of changing machinery function
or spare parts without permission,
the manufacturer will not be
responsible for the results.
If any accident happened because
of operation with spare parts
m i s s i n g o r b r o k e n , t h e
m a n u f a c t u r e r w i l l n o t b e
responsible for the results.
Even if the user obeserve the saft
operation rules and operate this
equipment according to the user
manual, risk still exsits. Any
result caused by force majeure,
the manufacturer will not be
responsible for it.