Henny Penny FlexFusion ELECTRIC SPACESSAVER Service Instructions Manual page 45

Performing the update
INFORMATION
INFORMATION
Switch on the unit.
Tap the "Unit functions" field.
Display menu Unit functions .
Tap the "Settings" field.
Display of window " PIN ".
Enter password and touch Confirmation field.
The password for the Settings menu is 111.
Select the "Software update" field on the left area of the menu by
swiping.
Tap the "Software update" field.
Tap the "OK" field.
The update begins.
The update can take up to 15 minutes. The software is restarted several times.
Do not switch unit off.
A confirmation then appears on the touchscreen.
Tap the "OK" field.
The software restarts automatically.
After the update, a blue screen may appear and the software does not start. In
this case, switch the unit off and then back on. In rare cases, this may happen
again.
Service-instructions
Software
45