Scope Of Supply; Dimensions And Weights - KSB UPA Installation & Operating Manual

8
Only for UMA 300, 14D submersible motors
9 Only for UMA-S 150, UMA-S 200, UMA-S 250 submersible motors
24 of 98
4 Description of the Pump (Set)

4.8 Scope of supply

Depending on the model, the following items are included in the scope of supply:
▪ Pump set with motor lead
Optional:
▪ Pump and/or motor as individual units
▪ Power cable
– Connected or supplied but not fitted
▪ Equipment for filling the motor
▪ Separate name plate
▪ Separate warning sticker
Optional accessories:
▪ Cable connector
▪ Cable clips
▪ Cooling shroud, suction shroud or pressure shroud
▪ Pedestals
▪ Electrical protection equipment
▪ Automatic control units
NOTE
A separate name plate is included in the scope of supply.
This name plate must be attached in a clearly visible position outside the place of
installation, e.g. at the control panel, pipeline or mounting bracket.

4.9 Dimensions and weights

For dimensions and weights refer to the data sheet of the pump (set).
UPA / UPA S
8)
9)
(ð Section 3.5, Page 16)