Storage/Preservation - KSB UPA Installation & Operating Manual

4 Observe the cable manufacturer's documentation, DIN VDE 0298-3 and/or the general arrangement drawing.
3 Transport/Storage/Disposal
CAUTION
Excessive bending stress on the pump set
Damage to the pump set!
▷ Choose attachment points which prevent excessive bending stress on the pump
set.
ü Suitable lifting equipment for the total weight has been selected and is on hand.
1. Fasten to a suitable lifting accessory, e.g. mounting plate.
2. Attach the lifting equipment, pull the pump/motor/pump set upright, and
secure it against tipping over.

3.4 Storage/preservation

If commissioning is to take place some time after delivery, we recommend that the
following measures be taken:
WARNING
Pump set tilting or rolling off
Risk of personal injury!
▷ Always secure vertically positioned pump sets against tipping over.
▷ Always secure horizontally positioned pump sets against rolling off.
WARNING
Laying electric cables at temperatures below zero degrees
Damage to the electric cable!
▷ Observe the minimum permissible temperature at the cable surface of -25 °C for
moving cables.
▷ Observe the minimum permissible temperature at the cable surface of -40 °C for
stationary cables.
CAUTION
Ambient temperature below the specified minimum
Danger of frost!
▷ Never subject the pump set to ambient temperatures which are lower than
those permitted for the drinking water/antifreeze mixture provided.
CAUTION
Improper storage
Damage to the electric cables!
▷ Observe the minimum bending radius
▷ Only remove the protective caps from the electric cables at the time of
installation.
For temporary storage, store submersible borehole pumps as follows:
1. In the original packaging: in a horizontal position
2. Without packaging: in a vertical position with the motor below
3. In a dry environment
4. Protected against direct sunlight and heat
UPA / UPA S
4)
of the electric cables.
15 of 98