Installing The Printer; Free The Front Tensioning Bar; Unlock The Head - MUTOH Viper TX Operation Instructions Manual

3.4 INSTALLING THE PRINTER

3.4.1 Free the front tensioning bar.

Cut the cable ties on both sides of the swingbar. See images below.

3.4.2 Unlock the head.

Step 1 :
Remove the wing screws (2) and the head lock bracket (1). See image below.
Step 2 :
Remount the wing screws after the bracket has been removed.
Step 3 :
Store the bracket in a safe place for future use.
Downloaded From ManualsPrinter.com Manuals
1 = Cable tie on the left side
2 = Cable tie on the right side
1 = Head lock bracket
2 = Screws
27
Viper TX – Operation Instructions
AP-75710, Rev. 1.1, 09/01/2008