Operation - Transition Networks CRMFE1011-200 User Manual

CRMFE10xx-20x / SRMFE10xx-20x
Installation
-- Continued
Install the Fiber Cable
1. Locate or build 100Base-FX compliant fiber cable with male, two-
stranded TX to RX connectors installed at both ends.
2. Connect the fiber cables to the CRMFE10xx-20x (local) media converter
as described:
• Connect the male TX cable connector to the female TX port.
• Connect the male RX cable connector to the female RX port.
3. Connect the fiber cables to the SRMFE10xx-20x (remote) media
converter as described:
• Connect the male TX cable connector to the female RX port.
• Connect the male RX cable connector to the female TX port.
Connect the fiber cable
to the CRMFE10xx-200
media converter as shown.
RX
TX
Power the Media Converter
The CRMFE10xx-20x slide-in-module media converter is powered through the
Transition Networks PointSystem™ chassis.
To power the SRMFE10xx-20x media converter:
AC
The external power supply provided with this device is UL listed by the
manufacturer of the power supply.
1. Connect the barrel connector on the power adapter to the media
converter's power port (located on the back of the media converter).
2. Connect the power adapter plug to AC power.
3. Verify that the media converter is powered by observing the illuminated
LED power indicator light.
DC
Consult the user's guide for the Transition Networks SPS1872-xx DC external
power supply for powering the media converter.
6
24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Connect the fiber cable
to the SRMFE10xx-200
media converter as shown
RX
TX

Operation

Status LEDs
Use the status LEDs to monitor the CGRFE10xx-20x and the SGRFE10xx-20x
in the network.
PWR Power On
RXF Fiber Receive Flashing = Reception of the data on the fiber link.
LKF Fiber Link On
RXC Copper Receive Flashing = Data reception on the copper link.
LKC Copper Link On
CRMFE10xx-200 SRMFE10xx-200
PWR
LKF
RXF
RXC LKC
TX
CRMFE200
techsupport@transition.com -- Click the "Transition Now" link for a live Web chat.
= Connection to the external power.
= Fiber link connection.
= Copper link connection.
TX RX
100Base-FX
100Base-TX
7