Table of Contents
Advertisement
S4110-4848
Install Guide
10 Gbps Fiber-to-Fiber Converter
• Supports various physical media types
• Fiber repeater, performs 3R signal regeneration
• Link pass through
• Auto link restore
• Fiber loopback
• No packet size limitation
Contents
Introduction.................................................................................................................................................... 2
Models ........................................................................................................................................................... 2
Accessories (ordered separately) ................................................................................................................. 3
Document Overview ...................................................................................................................................... 3
Related Manuals and Online Help ................................................................................................................ 3
Application Examples .................................................................................................................................... 4
Pre-Installation .............................................................................................................................................. 5
Safety ........................................................................................................................................................ 5
Unpacking ................................................................................................................................................. 5
Ship Kit Contents ...................................................................................................................................... 5
DIP Switch SW1 (Function Settings) ........................................................................................................ 6
Installation and Setup .................................................................................................................................... 7
General ..................................................................................................................................................... 7
Install the S4110 ....................................................................................................................................... 7
Installing SFP/SFP+ Devices .................................................................................................................... 8
Cabling ...................................................................................................................................................... 9
Power Connection .................................................................................................................................. 10
Operation..................................................................................................................................................... 11
Power and Fiber Status LEDs ................................................................................................................ 11
Cable Specifications ............................................................................................................................... 13
Cable Types ............................................................................................................................................ 13
Messages ................................................................................................................................................ 15
Troubleshooting .......................................................................................................................................... 16
Contact Us................................................................................................................................................... 17
Compliance Information .............................................................................................................................. 17
FCC Regulations .................................................................................................................................... 17
Canadian Regulations ............................................................................................................................ 17
European Regulations ............................................................................................................................ 17
Declaration of Conformity ....................................................................................................................... 18
Electrical Safety Warnings .......................................................................................................................... 19
Record of Revisions .................................................................................................................................... 20
33573 Rev. B
https://www.transition.com/
Page 1 of 20
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Transition Networks S4110-4848
Summary of Contents for Transition Networks S4110-4848
-
Page 1: Table Of Contents
S4110-4848 Install Guide 10 Gbps Fiber-to-Fiber Converter • Supports various physical media types • Fiber repeater, performs 3R signal regeneration • Link pass through • Auto link restore • Fiber loopback • No packet size limitation Contents Introduction..............................2 Models ................................2 Accessories (ordered separately) ......................... -
Page 2: Introduction
S4110 Install Guide Introduction Transition Networks’ two-port S4110 series is a 10 Gbps Fiber-to-Fiber Converter supporting data rates from 1G to 11.5G bps; this fiber-to fiber port converter has two SFP+ slots and performs full 3R (re- amplify, re-shape, and re-timing) signal regeneration. It can be used all alone or it can be connected to... -
Page 3: Accessories (Ordered Separately)
The S4110 Power Supply is included. To order the corresponding country-specific power supply, add the extension to the end of the SKU (e.g., S4110-4848-NA). The Country Codes are -NA = North America, -LA = Latin America, -EU = Europe, -UK = United Kingdom, -SA = South America, -JP = Japan, -OZ = Australia, and -BR = Brazil. -
Page 4: Application Examples
Transition Networks S4110 Install Guide Application Examples The S4110 provides up to 10Gig fiber-to-fiber port repeating and performs full 3R (re-amplify, re-shape and re-timing) signal regeneration. The figures below show how x4110 devices can be used in pairs (scenarios A,B,C below) or used as single repeater in a customer network (scenarios D & E below); It can also interconnect with an x4110-1048 (scenario F). -
Page 5: Pre-Installation
Transition Networks S4110 Install Guide Pre-Installation CAUTION: Observe electrostatic discharge precautions when handling the S4110. Failure to observe this caution could result in damage or failure of the S4110. Safety Before installing the S4110, read these “Safety Cautions” and ensure that the requirements noted are met. -
Page 6: Dip Switch Sw1 (Function Settings)
Transition Networks S4110 Install Guide DIP Switch SW1 (Function Settings) The 8-position DIP switch is labeled CONFIG SWITCHES on the right side of the S4110 enclosure. The factory default setting is SW1 – 8 in the ON position (Down). SW5 - 8 settings are not used (‘do not care’). -
Page 7: Installation And Setup
The S4110 is a standalone module that can be deployed on its own or it can be connected to a C4110 ION Chassis card installed in a Transition Networks ION chassis (ION001-x and ION219-x). A complete list of ION platform products is at https://www.transition.com. -
Page 8: Installing Sfp/Sfp+ Devices
SFP/SFP+ Optical Transceivers Transition Networks SFP and SFP+ devices are small form factor, hot-pluggable transceivers which allow for a single piece of network equipment to be connected to a multitude of interfaces, protocols, and transmission media via the SFP/SFP+ port. All of Transition’s SFPs and SFP+ devices are compliant with the Multi-Sourcing Agreement (MSA) ensuring interoperability with all other MSA compliant networking devices. -
Page 9: Cabling
Transition Networks S4110 Install Guide Cabling The C4110 can be used in telecom and enterprise applications where links supporting data rates from 1Gig to 10Gig require fiber extension or where 10Gig links require an interface between two fiber networks. It performs 3R (re-amplify, re-shape, re-time) signal regeneration. The S4110 is protocol ‘agnostic’, supporting a wide variety of protocols in a network;... -
Page 10: Power Connection
Transition Networks S4110 Install Guide Power Connection The S4110 ships with a power supply module that provides power via a barrel connector to the S4110 power receptacle. Figure 6: Power Connection Make the power connection as described below. 1. Plug the power supply’s barrel connector into the standalone module See the figure below. -
Page 11: Operation
Transition Networks S4110 Install Guide Operation Power and Fiber Status LEDs The status LEDs (labeled PWR and LINK are shown below. Use the status LEDs to monitor S4110 operation in the network. Figure 7: Power and Fiber Status LEDs The Power and Fiber Status LEDs are described below. -
Page 12: Technical Specifications
Transition Networks S4110 Install Guide Technical Specifications Standards: IEEE802.3ae / ITU.G.709 / SFF8431 Data Rate 10 Gbps Dimensions Width: 0.86” [21.85 mm] Depth: 6.5” [165 mm] Height: 3.4” [86.36 mm] Power Source External AC/DC power supply Supplied AC Power Cord/Adapter Power Consumption 4.2W (350mA @12V) -
Page 13: Cable Specifications
Transition Networks S4110 Install Guide Cable Specifications ™ The physical characteristics must meet or exceed IEEE 802.3 specifications. Fiber port: SFP+, both Class-I and Class-II, 10.3125Gbps. Cable Types The cabling specifications are provided for reference and troubleshooting purposes. Fiber (10GbE) Cabling The two general types of fiber optic cables are SMF (single-mode fiber) and MMF (multi-mode fiber). - Page 14 Transition Networks S4110 Install Guide Optical Transport Network (OTN) The Optical Transport Hierarchy (OTH) is a new transport technology for the Optical Transport Network (OTN) developed by the ITU. OTH is based on the network architecture defined in ITU G.872 "Architecture for the Optical Transport Network (OTN)".
-
Page 15: Messages
Transition Networks S4110 Install Guide SONET (Synchronous Optical Transport Network) Synchronous Optical Network, a standard for connecting fiber-optic transmission systems. SONET was proposed by Bellcore in the middle 1980s and is now an ANSI standard. SONET defines interface standards at the physical layer of the OSI seven-layer model. The standard defines a hierarchy of interface rates that allow data streams at different rates to be multiplexed. -
Page 16: Troubleshooting
Transition Networks S4110 Install Guide Troubleshooting If a problem or exception occurs, the S4110 will send a related Trap message to the Trap Server to report this event. You can launch the Trap Server in Focal Point 3.0 to capture the Trap message to better understand C4110 status. -
Page 17: Contact Us
Transition Networks S4110 Install Guide Contact Us Technical Support: Technical support is available 24-hours a day US and Canada: 1-800-260-1312 International: 00-1-952-941-7600 Main Office tel: +1.952.941.7600 | toll free: 1.800.526.9267 | fax: 952.941.2322 sales@transition.com techsupport@transition.com customerservice@transition.com Address Transition Networks 10900 Red Circle Drive Minnetonka, MN 55343, U.S.A. -
Page 18: Declaration Of Conformity
In accordance with European Union Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003, Transition Networks will accept post usage returns of this product for proper disposal. The contact information for this activity can be found in the 'Contact Us' portion of this document. -
Page 19: Electrical Safety Warnings
Transition Networks S4110 Install Guide Electrical Safety Warnings Electrical Safety IMPORTANT: This equipment must be installed in accordance with safety precautions. Elektrische Sicherheit WICHTIG: Für die Installation dieses Gerätes ist die Einhaltung von Sicherheitsvorkehrungen erforderlich. Elektrisk sikkerhed VIGTIGT: Dette udstyr skal nstallers I overensstemmelse med sikkerhedsadvarslerne. -
Page 20: Record Of Revisions
Trademark Notice: All trademarks and registered trademarks are the property of their respective owners. Copyright restrictions: © 2015, 2016 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic or mechanical - without written permission from Transition Networks.
Need help?
Do you have a question about the S4110-4848 and is the answer not in the manual?
Questions and answers