Pos : 50.50 /Ü bersc hriften/Ü berschriften 2/U-Z/Z Zentr ale Kettenschmi erung @ 33\mod_1254819776816_78.doc x @ 319945 @ 2 @ 1
12.15
Central chain lubrication system
Pos : 50.51 /BA/Ei nstellungen/R undball enpresse/Zentr ale Kettensc hmier ung @ 33\mod_1254819918129_78.doc x @ 319966 @ @ 1
Fig. 172
The central chain lubrication system is attached to the left-hand side of the machine behind the
front guard.
Each time the drive shaft makes a rotation, oil is forced out of the tank (1) via the pump (2) and
the lubrication manifolds attached to the left-hand and right-hand side of the machine, and onto
the brushes on the drive chains.
Different nozzles are built into the lubrication manifolds for each lubrication point.
The delivery rate can be adjusted by means of the eccentric cam (3) on the drive roller.
2
Fig. 173
•
Loosen the screws (2).
•
Rotate the eccentric cam disc (1).
•
Retighten the screws (2).
Pos : 50.52 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1
1
2
3
RBV05150
128 mm
1
VP-2-001
Settings
201