Contents Of Package - Hatteland JH 19T01 MIL User Manual

Contents of package

This product is shipped with:
Item
4 pcs of PAN M6X25 black bolts with M6 plastic washer.
These should only be used to secure the display into a
console.
Note: If you prefer your own bolts, make sure they are minimum
M6 and 25mm in length for security reasons.
1 pcs of Standard BNC Signal Cable.
DSUB 15P Male to BNC 5P Male - Length approx: 1.8m
1 pcs of Standard Power Cable.
(European Type F "Schuko" or US Type b standard plug)
Length 1.5m
Note: Power cable not included in the DC version.
1 pcs of User Manual MIL
Optional Accessories:
Item
4 pcs of M6X12 Unbraco bolts (Included with bracket)
These should only be used to secure the bracket on the
display.
If you prefer your own bolts, make sure they do not exceed 12mm
in length. Use any longer will do serious damage to components
inside the product!
1 pcs of Standard Serial Cable
DSUB 9p Male to DSUB 9p Male - Length approx: 1.5m
This cable is not included if you purchased a product with
touchscreen or remote control serial interface installed.
IND100131-5
Description
Description
7
Illustration
Illustration
INB100005-3 (Rev 9)