Table of Contents
Advertisement
The USB HUB Controller interfaces with the Video Co
such as USB memory sticks and Authentication device
The OPE Controller displays the status of the system b
actions or the Video controller.
The DADF Controller controls some mechanisms requ
communicates with the Scan Controller to synchronize
the scanning data to the Video Controller through the P
A MICOM at the Engine Controller activates each cont
optimized energy-saving algorithm for optimal efficienc
side is used to safely shut down the system power. It i
FDB (Fuser Drive Board)
SMPS Board2
Service Manual
2. Product d
description
ntroller, the OPE Controller, and some USB Devices
es such as Common Access Card readers.
by using the WSVGA TFT LCD in response to user
uired to scan by feeder continuously and
e the scanning timing. The Scan Controller transfers
PCIe high speed bus.
troller's power and turns off power according to an
cy. The soft Power Switch in the OPE Controller left-
s controlled by the MICOM.
SMPS Board1
S
2-7
71
Main Board
Main Board
Fax Board
HVPS Board1
HVPS Board2
SAMSUNG ELECTRONICS
Advertisement
Table of Contents
