Samsung CLX-9252 Series Service Manual page 256

4.5.7. TR Control Mode
• Service Functions > TR Control Mode
Purpose
Operation
Procedure
Verification
Specification
Reference
Service Manual
To correct transfer related prob
transfer value to optimize image p
1. T1 Control Problems
• Choose the process speed
be used.
• Adjust T1 PWM value base

Gray Spot : Increas

Non Cyclic White L

OPC Cyclic Ghost
Gray Spot
2. T2 Control Problems
• Choose the paper group, pa
• Adjust T1 PWM value base

Blur : Increase T1 P

Poor Transfer : Incr

Re transfer : Decre Re-transfer : Decre

White Spot : Decre
Blur
3. Blur Upgrade Mode : Turn on
4. OHP Upgrade Mode : Turn o
Note that this option needs to b
OHP OHP printing. Most of OHP type i ti M t f OHP t
Print out a test job and make su
N/A
N/A
4.Servic ce Mode
lems. This function can be used to change the
g e quality to a certain type of paper. q y
(Full, Half, Lower) based on the type of paper to
ed on the problem type.
se T1 PWM value of the issued color
Line : Decrease T1 PWM value of the issued color
: Decrease T1 PWM value of the issued color
No on Cyclic White Line
aper side, and paper direction.
ed on the problem type.
PWM value
rease T1 PWM value
ease T1 PWM value ease T1 PWM value
ase T1 PWM value
Poor Transfer
n the mode when black lines becomes blur.
on the mode when transfer on OHP becomes poor.
e turned on only if there is a transfer problem in
es can be used without this option turned on. b d ith
ure the transfer problem has resolved.
4-5 51
yp p p
OPC Cyclic Ghost
White Spot
t thi ti t d
SAMSUNG ELECTRONICS