Samsung CLX-9252 Series Service Manual page 247

• Diagnostics > Adjustment > Finisher Adjustm
Purpose
Operation Operation
Procedure
Verification Verification
Specification
Reference
Service Manual
To correct alignment of print out
function would be very rare and
standardized.
1. Choose one item from the 1 Choose one item from the
• Front Tamper Position (
• Rear Tamper Position (
2. Select one item and press th
3. Change the adjustment valu
to rear position, while - valu
4. Press the "OK" button to ap
Print out and check the stack of Print out and check the stack of
Front Tamper Position Unit: mm
Rear Tamper Position Unit: mm
Rear
ⓑ
Finishing Tray
ⓐ
Front
4.Servic ce Mode
ment > Tamper Position
t stack at finishing tray. Note that use of this
would be required if the size of paper is not
table There are two items to choose table. There are two items to choose.
ⓐ
)
ⓑ
)
he edit button.
ue with arrow button. + value moves the position
ue moves the position to front position.
ply the new value to the system.
paper is aligned correctly. paper is aligned correctly
m, Scale: 0.1, Min/Max: ±50mm
, Scale: 0.1, Min/Max: ±50mm
4-4 42
Finisher
Front Cover
SAMSUNG ELECTRONICS