3.9 SMPS Board
Note – This machine has 2 SMPS boards.
1. Remove the rear upper cover [A] after removing
7 screws.
[A]
[A]
2. Remove the rear lower cover [B] after r
removing 5 screws.
[B]
Service Manual
3. Replacemen
nt Procedures
3. Remove the SMPS shield cover after
removing 6 screws.
removing 6 screws
4. Unplug all connectors. Remove 4 screws.
And remove the SMPS board1.
5. Unplug all connectors. Remove 4 screws.
And remove the SMPS board2.
3-5
51
SAMSUNG ELECTRONICS