● Code :
S3-3111
● Symptom / Cause :
The MFP could not execute the copy and scan functio
● Troubleshooting method :
1. Is the MFP in lock up status?
Reboot the MFP.
2. Check the connection between Scan joint board and
Is it connected properly?
Yes : Replace the Scan joint board(JC92-02579A).
(Refer to 3.3.4 Scan joint board)
Scan joint board
Scan joint board
3. If the message does not disappeared after replacing
(JC92-02580 for 9352 / JC92-02581A for
Service Manual
7. Troubles
shooting
● Error message :
:
Scan System Failure
e : #S3-3111. Turn off then on.
ons. (Communication error with scanner board.)
d Main board.
g the scanner board, replace the main board.
9252)
7-9
96
SAMSUNG ELECTRONICS