Samsung CLX-9252 Series Service Manual page 318

● Code :
A1-2211
A1-2213
● Symptom / Cause :
• A1–2211 : Yellow OPC motor is stopped but machin
• A1–2213 : Yellow OPC motor is operating but mach
● Troubleshooting method :
1. Turn the machine off then on. If the error persists, t
2. Open the front cover. Remove the yellow imaging u
Check if there are any foreign substances or paper
3. Remove the rear cover. (Refer to 3.2.4 Rear Cove
4. Check if the yellow OPC motor connector is connec
K
Service Manual
7. Troubles
● Error message :
Motor Failure: #A1-2211. Tur
Motor Failure: #A1-2213. Tur
Y
C M
shooting
rn off then on. Call for service if the problem persists
rn off then on. Call for service if the problem persists
ne recognizes it as operational.
ine recognizes status as "Stopped".
turn the machine off again.
unit. (Refer to 6.2.2. Imaging Unit)
r around yellow drum drive unit.
er.)
cted correctly.
7-2 21
SAMSUNG ELECTRONICS