Table of Contents
Advertisement
2.7.4.7 Interval During Print Job
Line position adjustment interrupts printing and then st
occurs when the machine checks at the sheet interval
when one of these conditions occurs:
∆T > Temperature threshold (LSU temperature: [d
•
•
Pages > Output threshold for all outputs (default:
2.7.4.8 Waste Toner Container Not-In
Line position adjustment starts automatically when wa
triggered after removing the Imaging Unit or when cha
new Imaging Unit, line position adjustment is automati
2.7.4.9 Printer Magnification Change
Line position adjustment starts automatically when ma
2.7.4.10 Main Scan Skew Adjustmen
Skew adjustment assembly [A] consists of the worm ge
detects and adjusts the scanning line slope manually.
Th
The skew adjustment assembly [A] for magenta, cyan,
k
dj
t
respectively, based on the adjustment part[3]. This me
Service Manual
t
bl [A] f
2. Product d
description
tarts automatically when one of these conditions
. Line position adjustment is automatically done
default: 4°C])
1000 pages)
nstalled / Installed
ste toner container is not-installed/installed. This is
anging Imaging Unit. When the machine detects a
cally performed.
es
agnification is changed in the printer adjustment menu.
nt
ear[1] and worm gear[2]. When executing ACR, it
t
and yellow adjusts the angle of the F2 lens [B]
d
ll
chanism corrects main scan skew.
[3]
[
[1]
2-4
49
dj
t th
l
f th F2 l
[A]
SAMSUNG ELECTRONICS
[B]
[2]
[B]
Advertisement
Table of Contents
