Samsung CLX-9252 Series Service Manual page 324

● Code :
A1-2511
A1-2513
● Symptom / Cause :
• A1–2511 : Black OPC motor is stopped but machine
• A1–2513 : Black OPC motor is operating but machin
● Troubleshooting method :
1. Turn the machine off then on. If the error persists, t
2. Open the front cover. Remove the magenta imagin
Check if there are any foreign substances or paper
3. Remove the rear cover. (Refer to 3.2.4 Rear Cove
4. Check if the black OPC motor connector is connect
K
Service Manual
7. Troubles
● Error message :
Motor Failure: #A1-2511. Tur
Motor Failure: #A1-2513. Tur
Y
C M
shooting
rn off then on. Call for service if the problem persists
rn off then on. Call for service if the problem persists
e recognizes it as operational.
ne recognizes status as "Stopped".
turn the machine off again.
g unit. (Refer to 6.2.2 Imaging Unit.)
r around black drum drive unit.
er.)
ted correctly.
7-2 27
SAMSUNG ELECTRONICS