Samsung CLX-9252 Series Service Manual page 432

Step
7 Print the TRC report (Service Report > Info
Printer Reports > TRC Control History > P
check if there is any error in the report. If a
greater than zero in "Fail" column stands f
Also check ErY, ErM, ErC, ErK. LocL, Loc Also check ErY ErM ErC ErK LocL Loc
column.)
8 Connectors are loose.
9 Motor is defective.
10 The problem has been eliminated through
steps up to 9 steps up to 9
Service Manual
7. Troubles shooting
Check item
ormation >
Print). Please
any number
for an error.
cC, and LocR cC and LocR
the checks of
7-1 35
Action
1. Check if the ITB engage and
disengage is operated normally.
2. Replace the Imaging Unit.
Reconnect.
Change the toner supply motor.
 Change video board
 Change LSU.  Change LSU
 Change HVPS board.
SAMSUNG ELECTRONICS