Rear Panel - Weco Multi Power 204T Instruction Manual

Multi Power 204T

2.3 REAR PANEL

1
5
○ Welding power source ON/OFF switch [Item 1].
○ Remote control connector [Item 2].
○ Connector for gas feed hose [Item 3]
• cylinder-generator
○ Power cable. [Item 4].
• Total length (including internal part): 2.5 m;
• Number and cross section of wires: 3 x 2.5 mm
• Type of plug supplied: Schuko
○ Warning LED for overcut protection triggering [Item 5].
○ Pre-arrangement for the supply socket of the cooling unit (purchasing and installing the relative
kit) [Item 6].
WELD THE WORLD
4
2
2
Cod. 006.0001.1420
08/09/2021 V.2.12
ENGLISH
3
6
7