Torch Trigger Procedure - Weco Multi Power 204T Instruction Manual

Cod. 006.0001.1420
08/09/2021 V.2.12
ENGLISH

11 TORCH TRIGGER PROCEDURE

L5
L4
L7
L6
L8
L9
L13
L14
L15
○ Press the S5
A
Depending on the welding mode selected, specific torch procedures are available. The avail-
ability of certain procedures depends on whether or not certain parameters or functions of the
unit are enabled or set in the associated menus.
The table shows the settings to be made to enable each procedure.
LEGEND
2T: _____________ 2 STROKE LIFT-ARC
2T HF: __________ 2 STROKE WITH HIGH FREQUENCY ARC STRIKE (HF)
4T: _____________ 4 STROKE LIFT-ARC
4T HF: __________ 4 STROKE WITH HIGH FREQUENCY ARC STRIKE (HF)
4T B-L: _________ 4 STROKE B-LEVEL
4T B-L HF: ______ 4 STROKE B-LEVEL WITH HIGH FREQUENCY ARC STRIKE (HF)
2T Q-SPOT: _____ 2 SPOT STROKE
2T Q-SPOT HF: __ 2 SPOT STROKE WITH HIGH FREQUENCY ARC STRIKE (HF)
√: _____________ Always available.
1: _____________ Available with the following setting: HF= on
38
WELD THE WORLD
D1 L1 L2 L3 L12
80
L18 L19 L21
L17
L16
L20
S2 S3
SELECTION
button to select the desired PULSED TORCH mode.
L26
L27
L26 2 STROKE
L28
L27 4 STROKE
L28 4 STROKE B-LEVEL
L29
L29 2 STROKE SPOT
A
S5
L10 L11 S1 E1
L25
L23
L22
L24
L26 L27 L29 L28
S4 S5
A
Multi Power 204T
L30
L31
L32
L33
SYN
S6