Weco Multi Power 204T Instruction Manual page 24

Cod. 006.0001.1420
08/09/2021 V.2.12
ENGLISH
*3:
The activation is suitable for the following welding modes:
• MMA
• DC TIG
Compatible remote control types:
• manual remote control.
*4: The activation is suitable for the following welding modes:
• MMA
- ELECTRODE TYPE
○ This parameter allows for the selection of the type of electrode to be used. The selection auto-
matically allows the optimum welding parameters to be set.
- VRD
○ This parameter reduces the potential across the welding sockets when welding is not in progress.
- The arc strike procedure is as follows:
• Touch the workpiece with the electrode tip.
• Raise the electrode.
• Power is released for several seconds.
• Touch the workpiece with the electrode tip.
• The welding arc will strike.
- LONG ARC VOLTAGE
○ This parameter inhibits power output when the potential between electrode and workpiece ex-
ceeds the preset threshold level.
- Consequences of a higher value:
• The welding arc persists even with a significant distance between the electrode and the work-
piece.
- Consequences of a lower value:
• Faster exit from weld.
24
WELD THE WORLD
Multi Power 204T