Table of Contents
Advertisement
Cod. 006.0001.1420
08/09/2021 V.2.12
ENGLISH
3
USER INTERFACE
MULTI POWER 204T
D1
L5
L4
L7
L6
L8
L9
L13
L14
L15
S2
CODE
SYMBOL
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
L12
10
WELD THE WORLD
L1
L2
L3
L12
L18
L19
L21
L17
L16
L20
S3
DESCRIPTION
This LED illuminates to show an anomaly in the operating conditions.
Illuminates to show the last voltage and current values measured during welding.
The value appears on the display D1:
The "HOLD" function is cleared when a new weld is started or when any setting is changed.
This LED illuminates to confirm the presence of power on the output sockets.
Illumination shows that the following function has been activated: VRD (reduced output volt-
age).
The no-load voltage between the welding sockets is switched from U0 to Ur (see technical
data).
Illuminates to show that a previously saved JOB has been loaded.
This LED indicates that the current reference is set up by the remote control.
When this LED illuminates the 2nd level Menu parameter is shown.
Illumination shows that the following function has been activated: HIGH FREQUENCY ARC
STRIKE (HF)
Illuminates to show a value in the following unit of measurement: KILOHERTZ
Illuminates to show a value in the following unit of measurement: AMPERES
Illuminates to show a value in the following unit of measurement: VOLTS
Illumination shows that the following parameter can be displayed: ELECTRODE TYPE
L10 L11
S1
L25
L23
L22
L24
L26 L27
L29 L28
S4
S5
Multi Power 204T
E1
L30
L31
L32
L33
SYN
S6
Advertisement
Table of Contents
