Weco Multi Power 204T Instruction Manual page 39

Multi Power 204T
Tab. 16 - Pulsed Torch trigger mode table.
→
↓
MODE 2T
MMA
AD GOUGING
ELECTRODE
√
DC TIG
CONTINUOUS
√
DC TIG
PULSED
MODE
√
SYNERGIC
PULSED DC
TIG
- 2 STROKE LIFT:
○ Touch the workpiece with the torch electrode.
○ Press (1T) and keep the torch trigger pressed.
○ Slowly lift the torch to strike the arc.
○ The welding current reaches the preset value, by way of a up slope time, if programmed.
○ Release (2T) trigger to start the weld completion procedure.
○ The current reaches the end current value in the time set in the down slope time parameter.
○ The arc is extinguished.
○ Gas delivery continues for the time set in the post gas parameter.
WELD THE WORLD
2T HF 4T
1 √
1 √
1 √
1St STROKE
STARTING
CURRENT
C.C.
CURRENT
STRIKE UP SLOPE
LIFT
PROCEDURE
4T HF 4T B-L 4T B-L HF
1 √
1 √
1 √
2nd STROKE
WELDING
CURRENT
DOWN SLOPE
Cod. 006.0001.1420
08/09/2021 V.2.12
ENGLISH
2T Q-SPOT 2T Q-SPOT HF
1 √ 1
1 √ 1
1 √ 1
FINAL
CURRENT
POST GAS
39