Multi Power 204T
machinery in operation, welding close to printed circuits or soldering near computers.
1
2
3
- MINIMUM PEDAL CURRENT
○ Minimum output current value with foot pedal controller external reference. The current is set as
a percentage with respect to the "maximum foot pedal current" parameter.
WELD THE WORLD
PROCESS FOR ARC IGNITION IN LIFT-ARC MODE:
Position the tungsten electrode on the ignition point, so that there is a dis-
tance of about 2-3 mm between the electrode and the workpiece
Touch the piece with the electrode and press the torch button according to
the mode selected.
Lift the torch to strike the arc.
Cod. 006.0001.1420
08/09/2021 V.2.12
ENGLISH
33