Subscribe to Our Youtube Channel
Related Manuals for Weco Discovery 150TP-VRD
Summary of Contents for Weco Discovery 150TP-VRD
- Page 1 Cod.006.0001.0415 30/08/2016 v2.1 ENGLISH WECO srl Via S. Antonio, 22 - BELVEDERE 36056 TEZZE SUL BRENTA (VICENZA) ITALY Tel.+39 0424 561943 - Fax +39 0424 561944 www.weco.it - E-mail info@weco.it Discovery 150TP-VRD Instruction manual...
- Page 2 Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH 2/12...
- Page 3 PREPARING FOR MMA WELDING ......................5 PREPARING FOR TIG WELDING ......................6 COMMISSIONING ............................7 USER INTERFACE ............................ 7 WELDING PARAMETERS .......................... 7 TECHNICAL DATA ............................ 8 SPARE PARTS ............................9 DISCOVERY 150TP-VRD ........................... 9 ELECTRICAL DIAGRAM ..........................11 DISCOVERY 150TP-VRD ..........................11 3/12...
-
Page 4: Introduction
It is recommended for MMA welding and TIG DC applications providing excellent arc characteristics. Discovery 150TP-VRD is ideal for operations on site like basic maintenance and building construction. A built-in Total Protection Device saves the inverter components from overvoltage and makes the unit suitable for use with unstable power supply and motor-generators. -
Page 5: Rear Panel
Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH Preparing for MMA (polarity to basic electrode) REAR PANEL 1. Warning LED for overcut protection triggering. In case of over-voltage in the supply line, the supply to the power source is cut off. The overcut protection protects electronic parts of the machine against damage caused by voltage surges. -
Page 6: Preparing For Tig Welding
Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH 9. Select the following welding mode on the user interface: DC TIG PREPARING FOR TIG WELDING This model of welding machine has not been provided either with 1. Set the welding power source ON/OFF switch to “O” (unit de- the control for gas flow (solenoid valve) or with the torch button. -
Page 7: Commissioning
Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH COMMISSIONING USER INTERFACE CODE SYMBOL DESCRIPTION Overheating alarm Indicates tripping of the welding power source thermal protection. Leave the unit running so that the overheated components cool as rapidly as possible. When the unit has cooled, the welding power source will reset automatically. -
Page 8: Technical Data
Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH TECHNICAL DATA Waste electrical and electronic equipment (WEEE) Electromagnetic compatibility (EMC) Directives applied Low voltage (LVD) Restriction of the use of certain hazardous substances (RoHS) Construction standards EN 60974-1; EN 60974-10 Class A Equipment compliant with European directives in force... -
Page 9: Spare Parts
Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH SPARE PARTS DISCOVERY 150TP-VRD 9/12... - Page 10 Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH CODE N° DESCRIPTION CODICE 005.0001.0002 BELT 011.0000.0021 UPPER COVER 015.0001.0001 HEAT SINK L=107mm 015.0001.0002 HEAT SINK L=50mm 050.0006.0001 POWER BOARD 012.0001.0000 INTERNAL FRAMEWORKS 050.0001.0110 LOGIC FRONT PANEL 013.0015.0849 FRONT LABEL 021.0001.1022 FIXED SOCKET 200A 012.0001.0150...
-
Page 11: Electrical Diagram
Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH ELECTRICAL DIAGRAM DISCOVERY 150TP-VRD 11/12... - Page 12 Cod.006.0001.0415 30/08/2016 v2.1 Discovery 150TP-VRD ENGLISH 12/12...
Need help?
Do you have a question about the Discovery 150TP-VRD and is the answer not in the manual?
Questions and answers