Reset (Load Factory Settings) - Weco Multi Power 204T Instruction Manual

Cod. 006.0001.1420
08/09/2021 V.2.12
ENGLISH
5

RESET (LOAD FACTORY SETTINGS)

L5
L4
L7
L6
L8
L9
L13
L14
L15
The reset procedure involves complete restoration of the default values, parameters and memory set-
tings set in the factory.
All memory locations will be reset and hence all your personal welding settings will be lost!
The reset procedure is useful in the following cases:
- Too many changes made to the welding parameters so user finds it difficult to restore defaults.
- Unidentified software problems that prevent the welding power source from functioning correctly.
○ Set the welding power source ON/OFF switch to "O" to switch the unit off.
○ Keeping both the S2
switch to "I" to turn on the equipment [
A
○ Press both buttons S2
FAC: The message will appear on display D1
- Wait for the memory clear procedure to terminate. This action will automatically close the
menu.
14
WELD THE WORLD
D1 L1 L2 L3 L12
FAC
L18 L19 L21
L17
L16
L20
S2 S3
A
ACTIVATION
and S6
and S6
L10 L11 S1 E1
L25
L23
L22
L24
L26 L27 L29 L28
S4 S5
buttons pressed, set the generator power source
SIMULTANEOUS ACTIONS]
Multi Power 204T
L30
L31
L32
L33
SYN
S6
A
ACTIVATION