Weco Multi Power 204T Instruction Manual page 22

Cod. 006.0001.1420
08/09/2021 V.2.12
ENGLISH
Tab. 3 - Parameters of 1st level menu: mode
ACRONYM / LED SETTING
WELDING CURRENT
L18
MAXIMUM CURRENT WITH REMOTE CONTROL
Ho.S.
HOT-START
Ar.F. ARC FORCE
*1: This parameter is set as a percentage referred to the value of the following parameter: WELDING
CURRENT
*2: SYN:
This code indicates that parameters control is synergic. The optimal value of this parameter
is set automatically by the microprocessor on the basis of the preset welding current value. This
value can be displayed but it is not user-adjustable.
When SYN is installed, to display the synergic value press the following button:
(except S3) to save the setting and exit the menu.
Press any button
- WELDING CURRENT
○ This parameter regulates the primary welding current value.
- MAXIMUM CURRENT WITH REMOTE CONTROL
○ The maximum output current value that can be achieved with foot pedal control external refer-
ence.
- HOT-START
○ This parameter aids electrode melting at the time of arc striking. It is set as a percentage re-
ferred to the value of the following parameter:
to maximum 250A.
- Consequences of a higher value:
• Ease of activation; Greater starting spatter; increase in the activation area.
- Consequences of a lower value:
• Difficulty of activation; Less starting splatter; Reduction in the activation area.
- ARC-FORCE
○ This parameter helps to avoid electrode sticking during welding. It is set as a percentage referred
to the value of the following parameter: WELDING CURRENT
- Consequences of a higher value:
• Fluency factors in welding; Arc welding stability;Increased melting of the electrode within the
workpiece; More weld spatter.
- Consequences of a lower value:
• The arc is extinguished more easily, less welding spatter.
22
WELD THE WORLD
MIN
10 A
0 %
0 %
WELDING CURRENT. The value is limited
Multi Power 204T
DEFAULT MAX NOTES
80 A 180 A
SYn 100 %
*1 - *2
SYn 250 % *1 - *2
S1