Output Format > Booklet Creation - Xerox 770 User Manual

Output Format > Booklet Creation
Booklet Creation allows you to create multi-page booklets from an ordered set of 1-Sided
or 2-Sided originals. When Auto% is selected, the print engine reduces or enlarges the
image as required. Any other Reduce/Enlarge selection could result in image loss. When
Booklet Creation is selected, the output is automatically set to 1-2 Sided.
Note
Ensure that the Original Orientation setting reflects the same orientation as that of the
original documents.
Booklet Creation options include:
Original Input
• 1 Sided Originals
• 2 Sided Originals
• 2 Sided Rotated Originals
Covers
This option allows you to attach covers to the booklet. The front and rear covers can
be output before the first page and after the last page of the document and on a
different type of paper. Select a Covers option:
• No Covers: No covers are added.
• Blank Covers: Blank media is attached to the output to provide blank covers.
• 2 Sided Covers: The first and second pages of the document are copied on both
sides of the cover.
• 1 Sided Covers: The first page of the document is copied on the front side of the
cover.
Last Page on Back Cover
This option uses the image of the last document page and copies it onto the back
cover.
Binding Shift
Use this option to set the booklet binding-shift value within the range from 0 to 1.9 in.
(0 to 50 mm) in 0.1 in. or 1 mm increments.
Divide Output
Use this option when you have a large number of original documents. The original
documents are divided to create subsets in order to reduce the thickness of each booklet.
The machine folds copies in half, and piles them up to form a booklet. The Light
Production C Finisher with Booklet Maker allows you to specify the number of sheets
within the range of 1-50 sheets in one-sheet increments.
®
Xerox 770 Digital Color Press
User Guide
Copy
5-17