Specifications; Standard/Booklet Maker Finisher - Xerox 770 User Manual

(continued)
Fault code
124 709

Specifications

Standard/Booklet Maker Finisher

Item
Tray Type
Top Tray: Collated/Uncollated
Note
Transparencies can be sent to the TOP tray of the finisher ONLY.
Transparencies CANNOT be sent to the stacker (middle) tray.
Stacker (middle) Tray: Collated/Uncollated (Offset available)
Supported Paper Size Top Tray:
• Maximum: SRA3, 13 x19 in., 12.6 x19.2 in., 330 x 488 mm (custom
• Minimum: 100 x 148 mm (SEF), 4 x 6 in. (SEF), A6 (SEF) postcards
Stacker (middle) Tray:
• Maximum: 13 x 19 in. (330 x 488 mm), SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Optional C/Z Folder tray: Supports A4 (SEF) and 8.5 x 11 in. (SEF)
Delivery to a supported third-party, DFA device:
• Maximum: 13 x 19 in., SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Supported Paper Weight Trays:
Top Tray: 55-350 gsm
Stacker (middle) Tray: 55-300 gsm
• Optional C/Z Folder tray: 64-90 gsm
Delivery to a supported third-party, DFA device: 55-350 gsm
Tray Capacity
Top Tray: 500 sheets
Stacker (middle)Tray: 2,000 sheets, 200 sets*
• Optional C/Z Folder tray: Minimum 30 sheets
*When using A4 LEF, B5 LEF, 8.5 x 11 in. LEF, 8 x 10 in. LEF, 7.5 x 10.5
in. LEF only. When using paper of other sizes, tray capacity is 1,500
sheets and 100 sets.
**Tray may not support some paper types.
®
Xerox 770 Digital Color Press
User Guide
Possible cause Recommended solution
The number of pages Decrease the number of pages, or
exceeds the number of cancel the stapling settings, then try
pages that can be stapled to print again.
Specification
size)
Standard/Booklet Maker Finisher
16-39