Xerox 770 User Manual page 130

Problem solving
027-744
There is a problem in the domain name of the job template server.
Make sure that the DNS server connection and the domain name are registered to the
DNS server.
027-745
The address of the DNS server is not registered on the machine.
Either register the address of the DNS server on the machine or set the address of the
job template server by an IP address.
027-746
The specified job template pool server protocol settings are incorrect.
Set up the correct port.
027-750
Attempted to command a job flow to a print document. Print documents are not
supported by job flows.
Check the document before starting the job flow.
027-751
When following the job flow, an error occurred.
Check the settings for the job flow.
027-770
The print data cannot be processed because of PDL error.
Check the print data and try to print again.
027-771
A disk full error occurred.
Remove unnecessary data from the hard disk to increase free disk space.
047-210
An error occurred with the offset stacking module.
Power-cycle the machine. If the machine is not improved by performing the relevant
remedy, contact your Xerox Customer Support Center.
047-320
A communication error has occurred with the Finisher.
Power off/on the machine. If the error continues, contact your Xerox Customer Support
Center.
062-210
The document feeder malfunctioned.
Contact your Xerox Customer Support Center.
10-22 ®
Xerox 770 Digital Color Press
User Guide