Xerox 770 User Manual page 144

Problem solving
submitted job. If the problem persists, check the Machine Status/Fault screen, select
the fault, and click on the Instructions button.
• If the machine stops running mid-job, or does not begin printing after a job is
submitted, verify that the applicable paper tray is not empty. The system will stop if
sufficient media is not available for a submitted job. If the problem persists, check
the Machine Status/Fault screen, select the fault, and click on the Instructions button.
• The system does not prohibit duplexing coated substrates from the internal trays
(Trays 1-3); however, there can be a significant increase in jams or multi-feeds. If
large quantities of coated paper are to be run, and if it is available, the optional OHCF
is recommended for paper feeding.
• When using heavy coated 11 x 17 in./A3 stock, closing Trays 1-3 with too much force
will result in a paper size misread. Open and close the tray gently to allow the paper
sensors to correctly identify paper size.
• If the adjustment arms are disturbed while re-loading paper in Tray 5 (Bypass), the
paper size setting will return to default and cause job to stop until the paper size
setting is corrected by the user.
10-36 ®
Xerox 770 Digital Color Press
User Guide