Paper And Other Media; Loading Media In Trays 1, 2, And 3; Loading Paper In Trays 1, 2, And 3 - Xerox 770 User Manual

Paper and other media

Related Topics:
Specifications

Loading media in trays 1, 2, and 3

Trays 1, 2, and 3 are identical. Each tray has a capacity of 550 sheets of 20 lb./75 gsm
paper. Stock can be loaded long edge feed (LEF) or short edge feed (SEF), landscape or
portrait.

Loading paper in trays 1, 2, and 3

Note
A paper jam may occur if a tray is opened while it is being used to feed stock.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load and align the edge of the paper against the LEFT edge of the tray.
Paper can be loaded either in the Long Edge Feed (LEF)/portrait or Short Edge Feed
(SEF)/landscape direction.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
®
Xerox 770 Digital Color Press
User Guide
4
4-1