Xerox 770 User Manual page 258

SquareFold Trimmer Module
(continued)
Fault Possible cause
code
013-303 A top cover is open.
013-304
013-208 The Trimmer Waste Container is full
013-940 or has a fault.
013-941
013-943 Booklet Tray on the SquareFold
Trimmer Module is full.
012-115 Finisher jam or fault
012-264
012-302
17-18
Recommended solution
1. Open the Top Left and Right Covers of the
SquareFold Trimmer Module.
Close the SquareFold Trimmer Module Top
2.
Left and Right Covers.
3. If fault persists, power off/on the machine.
4. If fault persists, call for service.
1. Pull open the container and empty any
trimmer scraps from it.
2. Reinsert the container into the SquareFold
Trimmer Module.
3. Ensure that the container is fully pushed in,
and that the indicator light is not lit.
4. If fault persists, repeat Steps 1-3.
5. If fault persists, power off/on the machine.
6. If fault persists, call for service.
1. Remove any booklets from the tray.
2. If fault persists, power off/on the machine.
3. If fault persists, call for service.
1. If machine's UI continues to reflect a
fault/jam, open the finisher and remove any
jams.
Close the finisher cover(s).
2. Follow the instructions shown on the
machine's UI to resume printing.
3. If fault persists, power off/on the machine.
4. If fault persists, call for service.
®
Xerox 770 Digital Color Press
User Guide